Clamp-Mounted Memory Foam Chair Headrest with Adjustable Support Arm
Clamp-Mounted Memory Foam Chair Headrest with Adjustable Support Arm
Medium-soft memory foam cushioning for everyday head support
Adjustable support arm helps fine-tune the headrest position
Clamp-mounted design upgrades compatible chairs without replacing them
Contoured cushion provides a broad, supportive contact surface
Secure screw-tightened bracket for firm, flat chair backs
Clean black finish designed to blend with modern office seating
Couldn't load pickup availability
- Visa payment method
- Master payment method
- American express payment method
- Discover payment method
- Diners club payment method
- Jcb payment method
- Unionpay payment method
- Apple pay payment method
- Google pay payment method
- Paypal payment method
- Shopify pay payment method
- Afterpay payment method
Clamp-Mounted Memory Foam Chair Headrest with Adjustable Support Arm
Product Details
Product Details
Upgrade a compatible office or desk chair with a dedicated padded headrest.
The headrest features a contoured medium-soft memory foam cushion mounted to an adjustable articulated support arm. A screw-tightened clamp secures the assembly to a suitable hard, flat area at the top of the chair back.
Key Features
- Medium-soft memory foam filling
- Contoured black cushion
- Adjustable articulated support arm
- Screw-tightened chair-back clamp
- Designed for compatible office and desk chairs
- No heating or powered components
What's Included
- 1 chair headrest with mounting bracket and clamp
- L-shaped tightening handle
Dimensions & Materials
Dimensions & Materials
Cushion Dimensions:
10.6 × 7.7 in (27 × 19.5 cm)
Net Weight:
1.43 lb (650 g)
Cushion Filling:
Memory foam
Hardness:
15, Medium Soft
Exterior Material:
Polyester
Color:
Black
Mounting Requirements:
- Maximum mounting thickness: 1.18 in (3 cm)
- Minimum hard, flat mounting width: 1.57 in (4 cm)
- Mount only to a firm, flat surface
- Uneven, rounded, leather, mesh, or other soft mounting surfaces may not be suitable
Assembly & Setup
Assembly & Setup
- Choose a hard, flat mounting area at the top of the chair back.
- Position the clamp over the mounting surface.
- Tighten the clamp screw until the headrest is held securely. Turn clockwise to tighten and counterclockwise to loosen.
- Adjust the articulated support arm to the desired position.
- Use the included L-shaped handle to tighten the bracket joints.
- Keep the support arm in a stable triangular configuration. Vertical installation is not recommended because it may not hold securely.
Care Instructions
- Do not wash the inner memory foam
- Spot clean only
- Air dry only
- Do not bleach
- Do not dry clean
- Do not leave the inner memory foam exposed to direct sunlight for extended periods
The setup and care instructions above follow the supplied manual.
Add the Headrest Your Chair Is Missing
Turn a compatible office or desk chair into a more complete seating setup without replacing the chair itself.
The padded memory foam headrest adds a dedicated place to rest your head during everyday desk use, while the adjustable support arm lets you refine its position around your seating setup.
Clean, practical, and designed to integrate naturally with modern office chairs.
Medium-Soft Memory Foam Comfort
The contoured cushion is filled with medium-soft memory foam, creating a supportive surface with enough give for comfortable everyday contact.
Its broad curved shape provides more usable surface area than a narrow bar-style headrest, while the textured black exterior keeps the design understated and office-ready.
Adjust the Position to Match Your Chair
The articulated support arm allows the headrest position to be adjusted around the shape and height of a compatible chair.
Set the bracket at a stable angle, tighten the joints securely, and refine the cushion position until it sits where you want it.
For the most secure setup, the support arm should remain in a triangular configuration rather than fully vertical.
Built for the Right Kind of Chair Back
A secure fit starts with the mounting surface.
The clamp is designed for a hard, flat section at the top of the chair back measuring no more than 1.18 in (3 cm) thick and at least 1.57 in (4 cm) wide.
Soft, rounded, uneven, leather, or mesh mounting areas may not provide the stable surface the clamp requires.
Check your chair before ordering for the best fit.
Secure Clamp-On Installation
The headrest attaches directly to a compatible chair back using a screw-tightened clamp.
Position the clamp over a suitable hard, flat mounting area, tighten the main screw, then use the included L-shaped handle to secure the bracket and adjust its angle.
No modification to the chair itself is required.
A Practical Upgrade for Everyday Desk Use
For a chair you already enjoy using, a dedicated headrest can be a simpler upgrade than replacing the entire seating setup.
The understated black finish, contoured cushion, and adjustable bracket are designed to work as one integrated accessory for compatible office, study, and workstation chairs.
Frequently Asked Questions
Will this headrest fit every office chair?
Will this headrest fit every office chair?
No. The mounting area must be hard and flat, no more than 1.18 in (3 cm) thick, and at least 1.57 in (4 cm) wide. Soft, rounded, uneven, leather, or mesh mounting areas may not provide a secure attachment point.
This is intentionally more precise than describing the product as universally compatible.
Is the headrest adjustable?
Is the headrest adjustable?
Yes. The articulated support arm allows you to change the headrest position and then tighten the bracket securely in place.
What is the cushion made from?
What is the cushion made from?
The cushion uses medium-soft memory foam with a polyester exterior.
How large is the headrest?
How large is the headrest?
The cushion measures approximately 10.6 in wide × 7.7 in high (27 × 19.5 cm).
How does it attach to the chair?
How does it attach to the chair?
The headrest uses a screw-tightened clamp that mounts to a compatible hard, flat section of the chair back. An L-shaped tightening handle is used to secure the adjustable bracket.
Does my chair need to be modified?
Does my chair need to be modified?
No drilling or permanent chair modification is required. The product attaches using its clamp system.
Can I install it on a mesh or soft upholstered chair back?
Can I install it on a mesh or soft upholstered chair back?
Not unless the chair also provides a suitable hard, flat mounting section. The clamp should not be secured directly onto soft mesh, rounded upholstery, leather, or another unstable surface.
How should I clean the headrest?
How should I clean the headrest?
Spot clean the cushion and allow it to air dry. Do not wash the inner memory foam, bleach it, dry clean it, or expose the inner foam to direct sunlight for long periods.