
One Tester. Ten Water Measurements.
The Kovelli 10-in-1 Digital Water Quality Tester brings together pH, total dissolved solids (TDS), electrical conductivity (EC), salinity, oxidation-reduction potential (ORP), dissolved hydrogen (H2), chlorine (Cl2), specific gravity, resistivity, and temperature.
Its compact pen-style design makes it practical for routine water checks at home or in dedicated water-management setups. Switch between measurement modes using the integrated controls and view your readings on the backlit digital display.
Monitor Water Across Different Applications
With suction rated up to 78 kPa, the vacuum is designed to collect everyday dust, crumbs, loose debris, and pet hair across common household surfaces.
Choose between From aquarium maintenance to hydroponic growing, different water applications call for different measurements.
Use the tester to check relevant water characteristics in freshwater or saltwater aquariums, hydroponic nutrient solutions, swimming pools, spas, and general water samples.
With multiple measurement modes in one handheld device, you can select the parameter needed for the task without switching between separate basic meters.
Interpret readings using the appropriate reference ranges and testing procedures for your specific application.he visible ECO and MAX cleaning modes from the handle-mounted control area, then monitor operating information directly from the integrated digital display.
Backlit Display. Straightforward Controls.
A backlit LCD keeps measurement values visible, while three integrated buttons provide direct access to the tester's operating functions.
Use the MODE/CAL button to cycle through measurement modes, the HOLD/TEMP button to retain a displayed value or change temperature units, and the power button to turn the instrument on or off.
Automatic temperature compensation operates within the specified 32–140°F (0–60°C) range, and the device automatically powers off after approximately five minutes to help conserve battery power.
Rechargeable Power for Routine Testing
Designed for convenient repeated use, the tester features Type-C charging beneath a protective top cover.
The rechargeable design eliminates the need for routine disposable battery replacement, while the pen-style body is easy to handle and store between testing sessions.
An IP67-rated housing adds protection against water exposure during normal handling. For correct use, immerse only the electrode end and keep the water level below the marked maximum immersion line.
After testing, rinse the electrode with clean water and replace the protective cap according to the operating instructions.
Built for Calibration and Continued Use
The tester supports pH calibration using standard 4.01, 6.86, and 9.18 pH calibration solutions.
An accessible electrode assembly allows compatible replacement components to be fitted when required, while the removable protective cap helps shield the sensing end between uses.
The included operating instructions explain measurement mode selection, calibration procedures, and routine maintenance.
With ten measurement functions and a serviceable design, this instrument provides a practical addition to your regular water-testing equipment.
Frequently Asked Questions
What can this water quality tester measure?
What can this water quality tester measure?
The tester provides ten measurement functions: pH, TDS, EC, salinity, ORP, dissolved hydrogen, chlorine, specific gravity, resistivity, and temperature. You can switch between measurement modes using the MODE/CAL button.
Can I use it for aquariums and hydroponic systems?
Can I use it for aquariums and hydroponic systems?
Yes. The powered floor brush is designed for routine cleaning across common household hard flooring and carpet surfaces.
Is the tester rechargeable?
Is the tester rechargeable?
Yes. The tester features USB Type-C charging beneath a protective upper cover. It also includes an automatic shutoff function after approximately five minutes of inactivity.
Is the device waterproof?
Is the device waterproof?
The tester has an IP67-rated housing. During measurement, immerse only the electrode end and keep the water level below the marked maximum immersion line. Ensure the charging cover is closed before use.
How do I switch between measurement modes?
How do I switch between measurement modes?
Press the MODE/CAL button to cycle through the available measurement parameters. The display indicates the selected measurement mode. The HOLD/TEMP button can also be used to retain a reading or change temperature units.
Does the tester need to be calibrated?
Does the tester need to be calibrated?
The tester is factory-calibrated and supports manual pH calibration when needed. Calibration can be performed using standard pH 4.01, 6.86, and 9.18 solutions. Follow the included operating instructions for the correct procedure.
How should I clean and store the electrode?
How should I clean and store the electrode?
After testing, rinse the electrode with clean water and replace the protective cap. Store the instrument in a dry location. Follow the operating manual for additional maintenance and calibration guidance.
Can this tester confirm whether water is safe to drink?
Can this tester confirm whether water is safe to drink?
The tester measures selected water quality parameters, but it does not detect every possible contaminant or certify that water is safe to drink. Comprehensive drinking-water safety assessment may require additional testing.